Hosted by Eric Andelin CP, Senior Workflow Specialist with guest speaker Michael O’Sullivan, VP Sales, SimActive Inc.
It is often challenging for new entrants into the aerial imagery and mapping service profession to determine cost savings when it comes to their processing software solution. Smaller sensors, altitude restrictions, line of sight requirements and overall flight duration create unique challenges for drone operators. Medium and large format sensors acquire much larger areas, but require a much larger investment, or the ability to subcontract out the acquisition. Mapping expenses tend to increase as projects become larger. And using the wrong image processing software can exacerbate this, leading to narrowing project profits. This webinar will show how a higher-end software such as SimActive’s Correlator3D™ can reduce overall project costs. REGISTER HERE.
Specifically, attendees will learn about the following:
- Common challenges and impact on costs
- Cost variations as projects increase in size
- Workflows in Correlator3D to minimize man-hours
- Accelerating timelines with distributed processing
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.