SSSI in conjunction with the Hunter Environmental Institute will present this webinar with three pre-eminent speakers:
Amy Steiger (Cardno)
Title: RPAS and thermal cameras for wildlife detection post-bushfire and coastal monitoring
Details: Amy has promoted the use of Remotely Piloted Aircraft Systems (RPAS) gaining experience with remote data capture to cover a range of coastal, environmental and land development applications.
RPAS thermal inspection capability was deployed this summer in wildlife detection post-bushfires.
Amy has also done volumetric surveys of beaches and flown isolated coastal cliff faces in NSW to capture high-resolution photography and derived photogrammetric models to identify geotechnical hazards and contribute to coastal monitoring.
Charity Mundava (WaterNSW)
Title: Remote Sensing in Water Management
Details: Charity will discuss the use of GIS and remote sensing to support water catchment management, feasibility and environmental studies for critical water infrastructure across the state and to support ongoing research into and management of river catchments. Charity will touch on the significance and spatial support for this in the recent NSW bushfires coordinating reservoir availability (in drought) and access for helicopter water drops and supporting bushfire fighting efforts.
Associate Professor In-Young Yeo (University of Newcastle)
Title: Remote sensing and GIS applications for water resources management
Details: Dr Yeo will explain how remote sensing can be used as a technique for assessing soil moisture using multi-source data fusion approaches, vegetation monitoring and water requirement with remote sensing and water balance approach.
She will explain the impacts of conservation management practices in agricultural catchments assessed using catchment model and remote sensing/GIS drawing on examples from Australian and American case studies
CPD Points
BOSSI CPD is 1 SP for this webinar.
Cost
As per details as follows
Contact
rom.nsw@sssi.org.au
The AEGC petroleum, mineral and water resource industry conference, incorporating the ASEG-PESA International Geophysical Conference and Exhibition, will be jointly hosted by the Australian Institute of Geoscientists (AIG), Australian Society of Exploration Geophysicists (ASEG) and Petroleum Exploration Society of Australia (PESA).
Under the conference theme of Geoscience for a Sustainable World, the AEGC will attract a large number of international and national delegates and organisations from across the spectrum of Australasian geosciences, representing industry, government and academia. It is expected there will be dedicated streams for Australian basins, resourcing a sustainable energy challenge, data, innovation and technology, high-quality resources for future generations and developing the future workforce.
The Australasian Hydrographic Society’s HydroSpatial2021 Conference will focus on how hydrography will develop in the future, noting the development of ‘digital twinning’ and the emerging name variants for hydrography such as ‘hydrospatial’ or ‘hydrogeomatics’.
The conference theme, Hydrography of the Future, morphs two modern yet wide-ranging aspects of the hydrographic surveying profession, and should draw papers from relevant scientific, technological, operational and environmental communities. The aim is to provide delegates with valuable insights, creative ideas and inspiration on how to harness current and future technologies, systems and processes so that they can deal with present challenges and prepare for a more sustainable future.
The 2023 ACT Geospatial Conference and Excellence Awards will bring together colleagues old and new to hear the latest updates from across the local geospatial industry.
The call for abstracts for the event is now open. Any topic of interest to the geospatial industry is welcome, including surveying (cadastral, engineering, hydrographic, mining), GIS, remote sensing and geodesy, or broader topics such as new technology, diversity and workforce management.
The deadline for submission of abstract proposals closes at midday on Tuesday, 3 October.
The Geospatial Excellence Awards Reception will be held at the conclusion of the conference sessions, giving attendees the chance to enjoy drinks and canapes whilst networking and celebrating the award winners.
Image credit: ©stock.adobe.com/au/r-o-x-o-r
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
Each year, the Locate conference attracts hundreds of national and international delegates from within and outside the spatial, space and surveying sectors.
As Australia’s premier spatial and surveying conference, Locate provides guests with a unique opportunity to learn about the latest trends and applications in geospatial technologies.
The 2024 event will be held at the International Convention Centre at Darling Harbour in Sydney, and will include a gala evening dinner and presentation of the Geospatial Excellence Awards (formerly the Asia-Pacific Spatial Excellence Awards).
The convenor for Locate24 will be Narelle Underwood, Surveyor-General of NSW.