Join Bentley Systems at the launch of what it says is the industry’s most complete Survey and Site Design Solution ever offered to the ANZ market.
As technology advances and industry expectations increase, your software needs to keep pace with this ever-changing environment. In short, your software needs to deliver on today’s requirements and be ready for tomorrow’s challengers.
If you work in road design, site surveying, site development and related fields, this webinar is for you.
Throughout the launch, Bentley Systems will demonstrate traditional survey data capture capabilities, coupled with the latest mass data collection survey methods, including Total Station techniques, Point Cloud techniques and Digital Photogrammetry techniques.
Leveraging the above survey results, the launch will continue through a typical site design workflow, incorporating aspects such as:
- Terrain creation and analysis
- Urban road widening design
- Carpark and recreational area design
- Drainage and Utility design and analysis
- Plan production and digital model delivery
- Model visualisation
Air Inspect Australia will also be joining the webinar to share their insights and learnings of their project.
If you or your company perform any of the above-mentioned workflows, then this is one webinar you should not miss.
The Australian Institute of Mine Surveyors (AIMS) National Conference will be held from 25 to and 27 May 2022 at the RACV Royal Pines Resort Gold Coast, Queensland.
The conference will begin on the Wednesday with optional workshops and a welcome dinner, followed the next day by a full program of sessions on a range of topics plus networking with sponsors within the network market place. There will have a final dinner on Thursday evening at the hotel, while Friday will again see a full day of conferring and networking.
Well-known comedian Elliot Goblet (described as “one of the most original comedians in the history of the known universe”) will be the MC for the welcome dinner, while the equally well-known sporting personality Sam Kekovich has been confirmed as the keynote speaker (“you know it makes sense”).
Image credit: RACV
The Australian Institute of Mine Surveyors (AIMS) National Conference 2023 will be held at the Hyatt Regency Sydney from 13 to 15 September 2023. This is the premier event on the AIMS calendar and should not be missed, especially with more than 20 sponsors in attendance showcasing the latest equipment and technology.
The conference’s keynote speaker will be Peter Baines, OAM, one of Australia’s most effective ‘socialprenuers’. A former police officer, he is the founder of the well-known charity ‘Hands Across the Water,’ and as such has created opportunities for hundreds of children in Thailand.
Peter’s humanitarian efforts have been recognised with significant national and international awards. In January 2014, he was awarded the Order of Australia Medal for his International Humanitarian work. In 2016, he received the Most Admirable Order of Direkgunabhorn awarded by the King of Thailand for his devotional services to the Kingdom of Thailand.
A powerful keynote speaker, Peter’s presentations take his audience from laughter to tears as he recounts his story and delivers the lessons he has learned by managing some of the world’s most devastating crises. His tales of the way in which he has contributed to the lives of many less fortunate people in the world, and the realisation of his personal dream are absolutely inspiring.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
Registrations are now open for the Geospatial Council of Australia’s 2024 International Women’s Day breakfast in Melbourne on 8 March. The breakfast will bring together women from across the geospatial sector to share experiences and foster connections among the remarkable individuals shaping the future of geospatial technology.
The event will also serve as a platform to amplify the voices of women in this field, highlighting their contributions, innovation and leadership.
Whether you’re a seasoned professional, an aspiring newcomer or a passionate advocate, these events promise to be filled with inspiring discussions, networking opportunities and empowering insights.
The details are:
- GCA members: $75 (incl. GST)
- Non-GCA members: $100 (incl. GST)
- Student members: $50 (incl. GST)
- Tables can seat up to 8.
- Time: 7:30am to 9:30am
- Venue: Kooyong Lawn Tennis Club, Kooyong
- Register
Registrations close Thursday, 29 February.
The breakfast is sponsored by 1Spatial, with other sponsorship opportunities still available. Contact events@geospatialcouncil.org.au for further information.
Registrations are now open for the Geospatial Council of Australia’s 2024 International Women’s Day breakfast in Brisbane on 8 March. The breakfast will bring together women from across the geospatial sector to share experiences and foster connections among the remarkable individuals shaping the future of geospatial technology.
The event will also serve as a platform to amplify the voices of women in this field, highlighting their contributions, innovation and leadership.
Whether you’re a seasoned professional, an aspiring newcomer or a passionate advocate, these events promise to be filled with inspiring discussions, networking opportunities and empowering insights.
The details are:
- GCA members: $75 (incl. GST)
- Non-GCA members: $100 (incl. GST)
- Student members: $50 (incl. GST)
- Tables can seat up to 8.
- Time: 7:30am to 9:30am
- Venue: Rydges South Bank (Rooftop South), 9 Glenelg St, South Brisbane
- Register
Registrations close Thursday, 29 February.
The breakfast is sponsored by 1Spatial, with other sponsorship opportunities still available. Contact events@geospatialcouncil.org.au for further information.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.