Organised by OSGeo, this international annual gathering of location enthusiasts is the largest global gathering for geospatial software. Now in its 15th year, FOSS4G (ie. Free and Open Source Software for Geospatial) brings together developers, users, decision-makers and observers from a broad spectrum of organisations and fields of operation.
Through six days of workshops, presentations, discussions, and cooperation, FOSS4G participants create effective and relevant geospatial products, standards, and protocols. The 2021 event will be focused for the first time on South America and will be held with the close collaboration of the GeoLibres Association in Buenos Aires, Argentina.
The 16th annual congress of the Open Source Geospatial Foundation, the non-profit organisation that supports and promotes the collaborative development of free and open source geographic technologies and open geospatial data, will be held in Florence, Italy, at the Palazzo dei Congressi, Palazzo degli Affari and the University of Florence.
FOSS4G (ie. Free and Open Source Software for Geospatial) brings together developers, users, decision-makers and observers from a broad spectrum of organisations and fields of operation.
The Geospatial Council of Australia invites industry members to participate in the special South Australian Geospatial Excellence Awards reception on Friday, 27 October 2023, in the Riverbank Rooms at the Adelaide Convention Centre.
With no Spatial Information Day this year due to Locate23 being held in Adelaide, this event will be held to announce the 2023 South Australia award winners, whilst also showcasing some of last year’s incredible winning projects.
The evening will be an opportunity for networking with colleagues old and new, and for celebration of the local geospatial industry.
Image credit: ©stock.adobe.com/au/andy_di
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
The not-to-be-missed Geospatial Council of Australia (GCA) South Australia Cadastral Workshop, to be held in Adelaide on 16 March, will bring together professionals in the field of land surveying and provide an opportunity for them to expand their knowledge of the complexities of cadastral surveying.
This workshop offers a unique opportunity for professionals in the field of land surveying to gather and expand their knowledge in the complexities of cadastral surveying. Participants will hear expert-led discussions into topics ranging from advanced surveying techniques to legal frameworks governing land boundaries, and gain invaluable insights to enhance their expertise and address the challenges of modern cadastral surveying practices.
- Members: $90 (incl. GST)
- Non-members: $135 (incl. GST)
- Registered survey graduates and students: $45 (incl. GST)
BeGeo, an initiative of the Belgian National Geographical Institute (NGI), is an annual national event for the geo sector in Belgium.
The BeGeo conference combines with a geographic information fair to bring together a wide range of players from the public sector, academia, research, the private sector and associations. This year, the organisers have once again chosen Brussels Expo as the location for the event.
BeGeo says its vision is to be a platform where important players from the sector meet and thus actively contribute to the growth of the knowledge and competences necessary to tackle complex challenges and realise the great potential of geodata.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.