The AEGC petroleum, mineral and water resource industry conference, incorporating the ASEG-PESA International Geophysical Conference and Exhibition, will be jointly hosted by the Australian Institute of Geoscientists (AIG), Australian Society of Exploration Geophysicists (ASEG) and Petroleum Exploration Society of Australia (PESA).

Under the conference theme of Geoscience for a Sustainable World, the AEGC will attract a large number of international and national delegates and organisations from across the spectrum of Australasian geosciences, representing industry, government and academia. It is expected there will be dedicated streams for Australian basins, resourcing a sustainable energy challenge, data, innovation and technology, high-quality resources for future generations and developing the future workforce.

The Australasian Hydrographic Society’s HydroSpatial2021 Conference will focus on how hydrography will develop in the future, noting the development of ‘digital twinning’ and the emerging name variants for hydrography such as ‘hydrospatial’ or ‘hydrogeomatics’.

The conference theme, Hydrography of the Future, morphs two modern yet wide-ranging aspects of the hydrographic surveying profession, and should draw papers from relevant scientific, technological, operational and environmental communities. The aim is to provide delegates with valuable insights, creative ideas and inspiration on how to harness current and future technologies, systems and processes so that they can deal with present challenges and prepare for a more sustainable future.

Join Bentley Systems at the launch of what it says is the industry’s most complete Survey and Site Design Solution ever offered to the ANZ market.

As technology advances and industry expectations increase, your software needs to keep pace with this ever-changing environment. In short, your software needs to deliver on today’s requirements and be ready for tomorrow’s challengers.

If you work in road design, site surveying, site development and related fields, this webinar is for you.

Throughout the launch, Bentley Systems will demonstrate traditional survey data capture capabilities, coupled with the latest mass data collection survey methods, including Total Station techniques, Point Cloud techniques and Digital Photogrammetry techniques.

Leveraging the above survey results, the launch will continue through a typical site design workflow, incorporating aspects such as:

• Terrain creation and analysis
• Urban road widening design
• Carpark and recreational area design
• Drainage and Utility design and analysis
• Plan production and digital model delivery
• Model visualisation

Air Inspect Australia will also be joining the webinar to share their insights and learnings of their project.

If you or your company perform any of the above-mentioned workflows, then this is one webinar you should not miss.

The International Cartographic Association (ICA) Commission on Atlases, the ICA Commission on Map Design, the Joint ICA-IGU Commission on Toponymy, the National Geographic Institute of Spain (IGN) and the Spanish Society for Cartography, Photogrammetry and Remote Sensing (SECFT) will jointly host a conference on atlases, toponymy and map design in Madrid.

During six sessions of four presentations each, questions concerning evolving dissemination concepts and techniques for atlases, recent development and examples of national atlases as well as important map design and toponomastic issues in atlas production will be discussed.

The theme of the event will be ‘Atlases in time’. Presentations will be held in a 20-minute format of 15 minutes presenting and 5 minutes discussion.

C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.

Attendees will be treated to:

• A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
• A case study from a company using Leica technology.
• Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
• Details of the latest underground detection technologies, such as locators and ground penetrating radar.
• Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
• A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.

Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.

The dates are:

• Melbourne: 28 February 2024, 9:00am to 1:00pm
• Sydney: 14 March 2024, 9:00am to 1:00pm
• Brisbane: 20 March 2024, 9:00am to 1:00pm
• Perth: 27 March 2024, 9:00am to 1:00pm
• Adelaide: 3 April 2024, 9:00am to 1:00pm

The cost is only $25 per head, and lunch will be provided. Registration details can be found here.

For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.

C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.

Attendees will be treated to:

• A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
• A case study from a company using Leica technology.
• Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
• Details of the latest underground detection technologies, such as locators and ground penetrating radar.
• Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
• A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.

Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.

The dates are:

• Melbourne: 28 February 2024, 9:00am to 1:00pm
• Sydney: 14 March 2024, 9:00am to 1:00pm
• Brisbane: 20 March 2024, 9:00am to 1:00pm
• Perth: 27 March 2024, 9:00am to 1:00pm
• Adelaide: 3 April 2024, 9:00am to 1:00pm

The cost is only $25 per head, and lunch will be provided. Registration details can be found here.

For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.

C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.

Attendees will be treated to:

• A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
• A case study from a company using Leica technology.
• Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
• Details of the latest underground detection technologies, such as locators and ground penetrating radar.
• Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
• A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.

Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.

The dates are:

• Melbourne: 28 February 2024, 9:00am to 1:00pm
• Sydney: 14 March 2024, 9:00am to 1:00pm
• Brisbane: 20 March 2024, 9:00am to 1:00pm
• Perth: 27 March 2024, 9:00am to 1:00pm
• Adelaide: 3 April 2024, 9:00am to 1:00pm

The cost is only $25 per head, and lunch will be provided. Registration details can be found here.

For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.

C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.

Attendees will be treated to:

• A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
• A case study from a company using Leica technology.
• Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
• Details of the latest underground detection technologies, such as locators and ground penetrating radar.
• Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
• A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.

Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.

The dates are:

• Melbourne: 28 February 2024, 9:00am to 1:00pm
• Sydney: 14 March 2024, 9:00am to 1:00pm
• Brisbane: 20 March 2024, 9:00am to 1:00pm
• Perth: 27 March 2024, 9:00am to 1:00pm
• Adelaide: 3 April 2024, 9:00am to 1:00pm

The cost is only $25 per head, and lunch will be provided. Registration details can be found here.

For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.

C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.

Attendees will be treated to:

• A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
• A case study from a company using Leica technology.
• Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
• Details of the latest underground detection technologies, such as locators and ground penetrating radar.
• Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
• A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.

Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.

The dates are:

• Melbourne: 28 February 2024, 9:00am to 1:00pm
• Sydney: 14 March 2024, 9:00am to 1:00pm
• Brisbane: 20 March 2024, 9:00am to 1:00pm
• Perth: 27 March 2024, 9:00am to 1:00pm
• Adelaide: 3 April 2024, 9:00am to 1:00pm

The cost is only $25 per head, and lunch will be provided. Registration details can be found here.

For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.