Join Bentley Systems at the launch of what it says is the industry’s most complete Survey and Site Design Solution ever offered to the ANZ market.
As technology advances and industry expectations increase, your software needs to keep pace with this ever-changing environment. In short, your software needs to deliver on today’s requirements and be ready for tomorrow’s challengers.
If you work in road design, site surveying, site development and related fields, this webinar is for you.
Throughout the launch, Bentley Systems will demonstrate traditional survey data capture capabilities, coupled with the latest mass data collection survey methods, including Total Station techniques, Point Cloud techniques and Digital Photogrammetry techniques.
Leveraging the above survey results, the launch will continue through a typical site design workflow, incorporating aspects such as:
- Terrain creation and analysis
- Urban road widening design
- Carpark and recreational area design
- Drainage and Utility design and analysis
- Plan production and digital model delivery
- Model visualisation
Air Inspect Australia will also be joining the webinar to share their insights and learnings of their project.
If you or your company perform any of the above-mentioned workflows, then this is one webinar you should not miss.
The 16th annual congress of the Open Source Geospatial Foundation, the non-profit organisation that supports and promotes the collaborative development of free and open source geographic technologies and open geospatial data, will be held in Florence, Italy, at the Palazzo dei Congressi, Palazzo degli Affari and the University of Florence.
FOSS4G (ie. Free and Open Source Software for Geospatial) brings together developers, users, decision-makers and observers from a broad spectrum of organisations and fields of operation.
The Institute of Navigation’s (ION) mid-year meeting, the International Technical Meeting (ITM), is a conference with a technical program related to positioning, navigation and timing and includes the ION Fellows and Annual Awards presentations.
In 2024, ITM will take place in Long Beach, California, January 22 – 25, 2024, and will be co-located with the Precise Time and Time Interval Systems and Applications Meeting.
A commercial exhibition and pre-conference tutorials will be held in conjunction with the conference.
The Institute of Navigation’s (ION) annual Precise Time and Time Interval Systems and Applications (PTTI) meeting will take place in Long Beach, California, January 22-25, 2024, and will be co-located with the ION International Technical Meeting.
The PTTI technical program is designed to:
- Disseminate and coordinate PTTI information at the user level
- Review present and future PTTI requirements
- Inform government and industry engineers, technicians, and managers of precise time and frequency technology and its problems, and
- Provide an opportunity for an active exchange of new technology associated with PTTI.
A commercial exhibition and pre-conference tutorials will be held in conjunction with the conference.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
C.R. Kennedy will be holding a national ‘Modern Methods of Construction Roadshow’ throughout late-February, March and April 2024, highlighting the ways in which the latest software, tools and technology are enabling businesses to streamline their operations.
Attendees will be treated to:
- A presentation on managing digital data workflow using BricsCAD, and the Leica iCON Total Station for efficient construction set out.
- A case study from a company using Leica technology.
- Information from Leica on some of the latest technologies in high-definition 3D laser scanning for accurate reality capture.
- Details of the latest underground detection technologies, such as locators and ground penetrating radar.
- Presentations on the latest in rotating lasers and handheld laser distance measurers (Leica distos) for quick and easy measurements.
- A look at how BricsCAD software can be used with each of these technologies to help bring all data and projects seamlessly together.
Time will be set aside for discussion, and demonstrations of each of the products will be made after the presentations.
The dates are:
- Melbourne: 28 February 2024, 9:00am to 1:00pm
- Sydney: 14 March 2024, 9:00am to 1:00pm
- Brisbane: 20 March 2024, 9:00am to 1:00pm
- Perth: 27 March 2024, 9:00am to 1:00pm
- Adelaide: 3 April 2024, 9:00am to 1:00pm
The cost is only $25 per head, and lunch will be provided. Registration details can be found here.
For more details, contact Bernie Edmonds at bedmonds@crkennedy.com.au.
The Institute of Navigation’s (ION) Pacific PNT Conference is a global event dedicated to the cooperative development of positioning, navigation and timing technology and applications.
The conference attracts policy and technical leaders from Japan, Singapore, China, South Korea, Australia, the United States and many other countries, who meet to discuss policy updates, receive program status updates and exchange technical information.
The conference will cover a wide range of topics:
- GNSS policy/status
- Polynesian navigation
- Aircraft navigation and surveillance
- Algorithms and methods
- Alternative navigation and signals of opportunity
- Aviation applications of GNSS
- Challenging navigation problems
- Emerging PNT consumer applications
- GNSS-R and GNSS-RO for environmental monitoring
- High-precision GNSS correction and monitoring networks
- Inertial navigation technology and applications
- Interference and spectrum
- Ionosphere monitoring with GNSS
- Natural hazards detection and other remote sensing applications
- Time and frequency distribution
- Space navigation technologies
Substantial discounts are available for early registrations.