Galileo’s first navigation signal transmitted

By on 20 December, 2011
Europe’s Galileo system has passed its latest milestone, transmitting its very first test navigation signal back to Earth.
The first two Galileo satellites, launched on 21 October, are in the midst of their In-Orbit Test campaign. A detailed check-up is being carried out by ESA’s Redu ground station in Belgium to ensure their payloads are performing as specified, with no degradation from the launch.
The different Galileo signals are being activated and tested one by one. Soon after the payload power amplifiers were switched on and ‘outgassed’– warmed up to release vapours that might otherwise interfere with operations – the first test signal was transmitted in the early morning of Saturday 10 December by the first Galileo satellite. This signal was then captured at Redu.
The test signal was transmitted in the ‘E1’ band, which will be used for Galileo’s Open Service once the system begins initial operations in 2014. The Open Service will be freely available to users all over the world. This signal is particularly important because it shares the ‘L1’ band of the US GPS navigation satellites.
Nestled amid the Ardennes forest, Redu was selected for the campaign because of its long heritage performing similar assignments for European telecommunications satellites.
For Galileo, the Redu centre is equipped with a 20 m-diameter L-band antenna – needed to assess the quality of the navigation signals at the high accuracy and cleanliness needed with the satellites being 23 222 km up in orbit – and with a C-band transmit antenna to test the onboard mission receiver and uplink navigation messages to the satellite. A UHF antenna is also available for transmitting search and rescue test signals to the satellites.
Redu is the geographical focus of a Europe-wide effort. Command and control of the satellites is being undertaken from a dedicated Galileo Control Centre in Oberpfaffenhofen near Munich in Germany, with control of the payloads and their navigation signals being performed from the second centre in Fucino, central Italy.
Until the end of this year, the test campaign is concentrating on the first satellite. The focus will move to the second Galileo satellite in January, with the aim of completing the In-Orbit Test in the first quarter of 2012.
Galileo is an initiative of the European Commission and ESA to provide Europe with an independent global satellite navigation system.
The Galileo satnav system combines the best atomic clock ever flown for navigation – accurate to one second in three million years – with a powerful transmitter to broadcast precise navigation data worldwide.

You may also like to read:


Sign up now to stay up to date about all the news from Spatial Source. You will get a newsletter every week with the latest news.

LINZ geospatial and property milestones in 2022–23
More than 3 million property searches and more than 100,000 ...
New guidelines released for IGS network CORS
The International GNSS Service guidelines are for owners and...
QuantX secures $750,000 for quantum-secured PNT R&D
The project will seek to harness quantum tech to guarantee t... raises an extra US$15 million
Series A round investment in the geospatial intelligence com...
Tilt-compensated RTK GNSS receiver
Emlid has announced what it says is the most powerful and fl...