Scanning the depths – the search for MH370

By on 8 January, 2020

Satellite communications data analysis led to the search for MH370 being shifted to the southern Indian Ocean, where it was coordinated by the Australian Maritime Safety Authority (AMSA).

Dr Dawn Wright

Though we have been mapping the oceans for hundreds of years, the missing MH370 flight forced Australian agencies to collaborate with an urgency that saw intelligent mapping application pushed beyond the realm of possibilities: towards seeing high-resolution maps for the entire sea floor of the globe.

The search begins

On March 8, 2014, Malaysia Airlines Flight MH370, a commercial jetliner on its way from Malaysia to China with 239 people on board, strayed from its flight path and disappeared from air traffic control radar. After the aircraft transmitted its final automated position report and made an unscheduled change in direction, radar tracked the aircraft crossing the Malaysian peninsula until it was outside of radar coverage range in the Malacca Strait. Analysis of satellite data revealed that MH370 had flown for over six hours after contact was lost and likely crashed along a narrow arc of the southern Indian Ocean.

The search area is approximately 2,000 kilometres from Perth.

The loss of MH370 remains one of the highest-profile catastrophes of modern commercial aviation, and five years later, despite one of the most expensive searches ever undertaken, MH370 still remains missing.

The initial surface and air search focused on the areas on either side of the Malaysian peninsula, in the South China Sea and the Andaman Sea. Satellite communications data analysis, however, led to the search being shifted to the southern Indian Ocean, where it was coordinated by the Australian Maritime Safety Authority (AMSA). From 18 March to 29 April 2014, this search scanned 4.7 million square kilometres of ocean and involved 21 aircraft that conducted 345 individual flights over 3,177 hours, as well as 19 ships from eight nations.

The difficulty in finding MH370 can be blamed in part on geology. The rugged topography of the Indian Ocean floor could potentially obscure the debris field, making undersea mapping an important part of the investigation. Despite the failed search effort, the monumental deep-sea mission produced the most detailed underwater map ever created.

A joint communique from the transport ministers of Malaysia, Australia, and China included the following statement upon the conclusion of the search:

“Despite every effort using the best science available, cutting-edge technology, as well as modelling and advice from highly skilled professionals who are the best in their field, unfortunately, the search has not been able to locate the aircraft. Accordingly, the underwater search for MH370 has been suspended. The decision to suspend the underwater search has not been taken lightly nor without sadness.”

This image shows the comparison of past satellite-derived bathymetry next to the higher-resolution data collected in the MH370 search.

Charting uncharted waters

In March of 2014, Australia led the search operation at the request of the Malaysian government. After a two-month aerial search of the surface that found no trace of MH370, the Australian Transport Safety Bureau (ATSB) began an underwater search that would use sonar, submersible vehicles, and a location intelligence platform to visualise the data. Geoscience Australia, Australia’s public-sector geography authority, provided advice to the ATSB on the procurement, technology and planning requirements for the bathymetric survey – and further to this, led the mapping effort, processing seafloor maps that helped the searchers visualise all data and adapt their strategies.

An analysis of radar data and metadata associated with subsequent satellite communications with the aircraft placed MH370 on a long arc within the Australian search-and-rescue zone. Investigators mostly agreed that the plane exhausted its fuel somewhere along that corridor. By analysing satellite communication data, Geoscience Australia drew the search area on a map and updated it as the analysis was refined. The initial search area encompassed more than 450,000 square miles.

Existing ocean depth (bathymetry) data of the search area was not of sufficient resolution to guide the submersible vehicles that would travel close to the seafloor to take closer looks. The first phase of the search would consist of a high-resolution survey of the ocean bottom. The underwater search primarily employed side scan and multibeam sonar equipment towed behind vessels to collect high-resolution images. The ships acquired data 24/7 as they travelled across the search area.

Fugro’s Echo Surveyor VII is specifically designed for high resolution and efficient survey operations in water depths reaching 4,500 metres.

Flagging potential hiding places

As the vessels moved across the search area, surveyors reviewed the sonar data in real time to flag any anomalies that could be an aircraft debris field. Onboard the ships, a geographic information system (GIS) functioned as a photographer’s ‘dark room’ allowing Geoscience Australia to develop pictures from the incoming data that would help searchers monitor sonar data quality as well as mission progress.

The resulting high-resolution maps would orient an autonomous underwater vehicle’s (AUV) more detailed searching. The AUV was used to explore the anomalous areas that warranted closer inspection with a camera and it was also used to search areas where there were gaps in the primary sonar coverage due to the seafloor terrain. Geoscience Australia mapped each gap that could potentially hide pieces of aircraft.

“Gaps will always exist where steep geology prevents soundwaves from reaching bottom,” said Megan McCabe, cartographer at Geoscience Australia. “The idea was to capture as much of those areas as possible and stitch the data captured by the AUV into the sonar coverage.”

Building an underwater highway

With gaps sparsely spread out over the entire search area, the challenge centred on the best way to search each gap. A makeshift underwater highway had to be created using the Esri mapping platform.

“We created a network analysis to see how we could move from gap to gap most efficiently by thinking about it like a delivery man’s dilemma,” Ms McCabe said. “The goal was to prioritise anomalies to build a ‘road network’ between them that we could efficiently investigate.”

Once it had the network, Geoscience Australia could create the best routes to get from point A to point B. This method helped navigate the AUVs to the areas of highest priority. The search located four shipwrecks but found no aircraft wreckage.

The improved resolution of the mapping effort also led to the discovery of deep-sea volcanoes, towering ridges, and deep trenches in a remote part of the southern Indian Ocean that was largely unexplored. Investigators discovered that the large mountain ridge within the arc was created by the collision of two tectonic plates. Sonar data revealed structures that soared more than 300 meters high in some places and trenches that plunged as deep as 1400 meters.

Adding value to the mission

The exhaustive search for MH370 also ranks as one of the largest marine surveys ever conducted thanks to the Fugro Survey team’s decision to always keep the multibeam sonar system on. The search collected 172,741 square miles of bathymetry data in the search area and another 268,432 square miles of data as the vessels travelled to and from the search area.

Three years’ worth of meticulous scanning and quality assurance review produced a highly detailed picture of the seafloor in the southern Indian Ocean. Geoscience Australia presented a story map to tell the story of their search. It includes interactive maps that recount the mission using embedded videos showing how the data was collected and what the new bathymetry looks like compared to previous seafloor maps in the area.

“This difficult search united teams across Geoscience Australia to rigorously apply science and technology to this important task,” Ms McCabe said. “We’re all disappointed that we did not find the aircraft, and we’re hopeful that the survey work will eventually lead to its discovery to provide closure for the families of the missing passengers and crew.”

In January 2017, the governments of Malaysia, Australia and the People’s Republic of China jointly announced the suspension of the search for MH370 and the search has been suspended until further credible evidence is available that identifies the specific location of the aircraft.

Although the mystery of the loss of the aircraft hasn’t been solved, the seafloor maps from the search will benefit scientific explorations of the southern Indian Ocean for years to come. Geoscience Australia have now published both Phase One and Two of sea floor mapping data obtained in the search.

Dr Dawn Wright is chief scientist of Esri. A globally recognised oceanographer and geographer, Dr Wright has authored and contributed to some of the most definitive literature on marine GIS.

You may also like to read:



Newsletter

Sign up now to stay up to date about all the news from Spatial Source. You will get a newsletter every week with the latest news.

Interview: Tori Murrant, GIS analyst
Having stumbled across the geospatial sector at university, ...
Testing SouthPAN and commercial GNSS services
UNSW surveying students were challenged to put a range of So...
Here’s what’s in our latest issue!
Learn about the metaverse, mapmaking, 3D scanning, RINEX, hy...
Modern Methods of Construction Roadshow
The events will show how the latest software, tools and tech...
Real-time LiDAR mapping system
The Brumby LiDAR rapidly produces point clouds by removing t...